Home » Broadband Tools » Scan Information » SG Security Scan
SG Security Scan | |||
---|---|---|---|
Scanning (141.148.28.46): | |||
Port | Status | Service | Description |
5000/tcp | closed | upnp | Universal Plug and Play (UPnP) uses two ports, 5000 TCP and 1900 UDP. UPnP is a set of networking protocols that allows for networked and mobile devices to seamlessly discover each others' presence on the network and communicate. 3CX Phone System Management Console League of Legends uses ports 5000-5500 UDP Trojan Horses that use port 5000: Back Door Setup, Blazer5, Bubbel, ICKiller, Ra1d, Sockets des Troie, Socket 23 UPnP discovery/SSDP, is a service that runs by default on Windows, and there are multiple security vulnerabilities associated with it, especially on older Windows versions. In 2001, Microsoft released 60 updates to Windows related to UPnP vulnerabilities. Stack-based buffer overflow in Hospira Communication Engine (CE) before 1.2 in LifeCare PCA Infusion System 5.07, Plum A+ Infusion System 13.40, and Plum A+3 Infusion System 13.40 allows remote attackers to cause a denial of service or possibly have unspecified other impact via traffic on TCP port 5000. OpenLambda 2019-09-10 allows DNS rebinding attacks against the OL server for the REST API on TCP port 5000. Lack of authentication in the network relays used in MEGVII Koala 2.9.1-c3s allows attackers to grant physical access to anyone by sending packet data to UDP port 5000. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the UPnP service, which listens on TCP port 5000 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9643. A denial of service vulnerability has been identified in Go2Call. The problem is that Go2Call doesn't handle long bogus UDP packets. This allows malicious people to crash the application by sending a 1500 byte long packet to port 5000/udp. SenNet Optimal DataLogger appliance, Solar DataLogger appliance and Multitask Meter could allow a remote attacker to bypass security restrictions, caused by no authentication mechanism implemented for the Telnet service. By connecting to Telnet service using TCP port 5000, an attacker could exploit this vulnerability to bypass access restrictions to connect to the shell and issue commands. There is no CSRF protection in Liman application. With a little help of social engineering (like sending a link via email/chat) an attacker may force the victim to click on a malicious link, with the purpose of manipulating his current account information, or changing entirely his password. Download the application, make an account and login inside the panel under : http://127.0.0.1:5000 expose the docker port on 5000. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6400v2 1.0.4.106_10.0.80 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the UPnP service, which listens on TCP port 5000 by default. When parsing the uuid request header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14110. Backdoor.Win32.BNLite / Remote Heap Based Buffer Overflow - the malware listens on TCP port 5000. Third party attackers who can reach the system can send a specially crafted payload to trigger a heap based buffer overflow overwriting the ECX, EDX registers and corrupting memory located on the heap. Backdoor.Win32.BNLite / Remote Stack Buffer Overflow - BioNet Lite Server 4.0a listens on TCP port 5000. Third-party attackers who can reach an infected system can trigger a buffer overflow overwriting the ECX, EDX and AX (16-bit) registers by sending a long junk payload. The Emerson ROC and FloBoss RTU product lines through 2022-05-02 perform insecure filesystem operations. They utilize the ROC protocol (4000/TCP, 5000/TCP) for communications between a master terminal and RTUs. Opcode 203 of this protocol allows a master terminal to transfer files to and from the flash filesystem and carrying out arbitrary file and directory read, write, and delete operations. |
Total scanned ports: | 1 | ||
Open ports: | 0 | ||
Closed ports: | 1 | ||
Filtered ports: | 0 | ||
Login (or register free) for a more detailed security scan. | |||
Our Security Scan found NO open ports. |
SG Security Scan complete in: 0.16 sec.
6,349,044 systems tested.
SG Security Scan engine v1.09 (2017.09.25).
Port Status Legend | |
---|---|
open | Open ports offer services that are potentialy vulnerable to attacks! All ports should be closed or filtered, unless you specifically require some open (and know exactly what they are). |
closed | Ports in this category respond to our scan, however appear to be closed. This state offers medium security. It still reveals that your system is up, and might provide some additional fingerprinting information to potential intruders. |
filtered | Filtered ports do not respond to a portscan at all, they don't appear to exist. This is the best security level for your ports, as it provides no information about your system or its existence (a.k.a. black hole). |
filtered? open|filtered | Filtered UDP ports that do not respond to the scan. Note that the UDP protocol is not lossless, and does not respond to all requests by definition. Therefore, the lack of response does not guarantee that a port is being filtered. We have send a few requests without response, and it is reasonable to believe the ports in this state are filtered. |
Notes:
List of all currently scanned ports and corresponding descriptions can be found - here -, as a part of our full known ports database.
You can scan any one single port by adding "?port=xxxxx" to the above URL, for example: www.speedguide.net/portscan.php?port=12345.
You can also specify the protocol(s) to scan, for example:
If the scan finds open ports, make sure you know what services are listening to them. Ask in our forums, check the ports database, use netstat as described here: How to find listening ports on my computer?
Related Links:
- SG Ports Database » Vulnerable Ports
- SG Security Scan » Scanned Ports » Commonly Open Ports
- SG Broadband Tools